作者:百检网 时间:2021-09-15 来源:互联网
ASTM A239-2014
中文名称:铁或钢制品上镀锌层薄点的定位规程
英文名称:Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
原文名称:Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
范 围:This practice is designed to locate the thinnest portions of the zinc coating on newly coated items (see Appendix X1). Variations in coating thickness can be due to the process by which the zinc is applied (hot dipped, electroplated, or sprayed) or by the geometry of the part that is coated. During hot-dip galvanizing, the coating thickness is affected by the drainage pattern of the molten zinc, while during zinc spraying (metallizing), coating thickness can be dependent on the operator's manipulation of the spray nozzle. The geometry of the part can also influence coating thickness especially during hot-dip galvanizing, where peaks and valleys on the part can cause molten zinc to build up or thin out. This practice is designed to identify those areas of the part where the coating is thin.
发布日期:2014-05-01
实施日期:2014-05-01
标准组织:美国试验与材料协会标准(ASTM)
ICS分类号:(25.220.40)金属镀层
中国标准分类号:(A29)材料防护
同一中标分类下的其他标准
• API TR 939-D-2007
• ASTM A143/A143M-2007(2014)防止热浸镀锌结构钢制品变脆和检测变脆程序的规程
• ASTM A153/A153M-2009钢铁构件镀锌层(热浸)规格
• ASTM A384/A384M-2007 钢制组装件热浸镀锌时防翘曲和变形的规程
• ASTM A90/A90M-2013钢铁制品上锌或锌合金镀层重量(质量)试验方法
• ASTM A90/A90M-2013(R2018)
• ASTM A123/A123M-2013钢铁制品镀锌层(热浸镀锌)规格
• ASTM A123/A123M-2017
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;
①本网注名来源于“互联网”的所有作品,版权归原作者或者来源机构所有,如果有涉及作品内容、版权等问题,请在作品发表之日起一个月内与本网联系,联系邮箱service@baijiantest.com,否则视为默认百检网有权进行转载。
②本网注名来源于“百检网”的所有作品,版权归百检网所有,未经本网授权不得转载、摘编或利用其它方式使用。想要转载本网作品,请联系:service@baijiantest.com。已获本网授权的作品,应在授权范围内使用,并注明"来源:百检网"。违者本网将追究相关法律责任。
③本网所载作品仅代表作者独立观点,不代表百检立场,用户需作出独立判断,如有异议或投诉,请联系service@baijiantest.com