标准号:DIN EN 13706-2-2003
中文标准名称:增强塑料复合材料.挤拉制型材规范.第2部分:试验方法和一般要求
英文标准名称:Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002
标准类型:G31
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:G31
国际标准分类号:83.120
适用范围:The document defines the general requirements applicable to the specification of all types of pultruded profiles falling within the scope of this specification as defined in Part 1 of the standard. This Part 2 of ENxxxx describes the procedures to be followed in the preparation of test specimens for the determination of mechanical properties required for the designation in Part 1 and the technical specification in Part 3. This Part 2 of ENxxxx also defines the test methods to be used to determine both the designated and the specified properties given in Parts 1 & 3 respectively.
相关标准
《GB/T11363-200811,12.1》钎焊接头强度试验方法 GB/T 11363-2008 11,12.1
《GB/T11363-200811,12.2》钎焊接头强度试验方法 GB/T 11363-2008 11,12.2
《AWSD1/D1M-2015》钢结构焊接规范
《GB/T2653-20086,7》焊接接头 弯曲试验方法 GB/T 2653-2008 6,7
《BSEN288Part-3:1992/A:1997》金属材料焊接工艺评定 第三部分
《AWSD1.6/1.6M:2017》不锈钢焊接规范
《BSEN288Part-1:1992/A:1997》金属材料焊接工艺评定 第一部分 焊接操作规范
《ISO9606-1:2012》焊工考试 第1部分:钢
《BSEN288Part-2:1992/A:1997》金属材料焊接工艺评定 第二部分 电弧焊焊接工艺
《ISO15614-1:2012》金属材料焊接工艺规程和评定-焊接工艺试验 第1部分:钢的电弧焊和气焊与镍及镍合金的电弧焊
百检网专注于为第三方检测机构以及中小微企业搭建互联网+检测电商服务平台,是一个创新模式的检验检测服务网站。百检网致力于为企业提供便捷、高效的检测服务,简化检测流程,提升检测服务效率,利用互联网+检测电商,为客户提供多样化选择,从根本上降低检测成本提升时间效率,打破行业壁垒,打造出行业创新的检测平台。
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;