ISO 8257-2-2001 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样的制备和性能的测定

标准号：ISO 8257-2-2001
中文标准名称：塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样的制备和性能的测定
英文标准名称：Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
标准类型：G32
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G32
国际标准分类号：83.080.20
引用标准：ISO 62-1999;ISO 75-2-1993;ISO 175-1999;ISO 178-1993;ISO 179-1993
适用范围：1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring their properties. Any property listed in this part of ISO 8257 and referred to in combina-tion with ISO 8257-1 shall be determined by the method referred to in this part of ISO 8257. 2 No values are quoted for these properties. Those required for the designation of PMMA materials for moulding and extrusion are given in ISO 8257-1. Other properties shall be determined by the appropriate methods referred to in this part of ISO 8257. 3 The values determined in accordance with this part of ISO 8257 will not necessarily be identical to those ob-tained using specimens of different dimensions and/or prepared by different procedures. They may also be influ-enced by colorants and other additives. The values obtained for the properties of a moulding depend on the moulding compound, the shape of test specimen, the test method and the state of anisotropy. The last-mentioned depends on the gating and the moulding conditions, for example temperature, pressure or injection rate. Any subsequent treat-ment must also be considered, for example conditioning or annealing. 4 The thermal history and the internal stresses of the specimens may strongly influence thermal and mechanical properties and resistance to environmental stress cracking, but exert less effect on the electrical properties, which mainly depend on the chemical composition of the moulding compound.