ASME PTC 6-2004 蒸汽轮机.勘误表:2/2006

标准号：ASME PTC 6-2004
中文标准名称：蒸汽轮机.勘误表:2/2006
英文标准名称：Steam Turbines Erratum: 2/2006
标准类型：K54
发布日期：2004/1/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K54
国际标准分类号：27.040
适用范围：This Code provides procedures for the accurate testing of steam turbines. It is recommended for use in conducting acceptance test of steam turbines and any other situation in which performance levels must be determined with minimum uncertainty. It may be used for testing of steam turbines operating either with a significant amount of superheat in the initial steam (typically fossil-fueled units) or predominantly within the moisture region (typically nuclear- fueled units). This Code contains rules and procedures for the conduct and reporting of steam turbine testing, including mandatory requirements for pretest arrangements, instruments to be employed, their application and methods of measurement, testing techniques, and methods of calculation of test results. The performance parameters which may be determined from a Code test include: (a) heat rate, (b) generator output, (c) steam flow, (d) steam rate, (e) feedwater flow. It also contains procedures and techniques required to determine enthalpy values within the moisture region and modifications necessary to permit testing within the restrictions of radiological safety requirements in nuclear plants.