AS/NZS 3823.2-2009 电器的性能.空气调节器和热泵.第2部分:能量标注和最低性能标准(MEPS)的要求

标准号：AS/NZS 3823.2-2009
中文标准名称：电器的性能.空气调节器和热泵.第2部分:能量标注和*低性能标准(MEPS)的要求
英文标准名称：Performance of electrical appliances— Air conditioners and heat pumps Part 2: Energy labelling and minimum energy performance standard (MEPS) requirements
标准类型：Q76
发布日期：2009/10/6 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q76
引用标准：AS 2706;AS 4755;AS 4755.3.1;AS/NZS 3823.1.1;AS/NZS 3823;AS/NZS 3823.1.2;AS/NZS 3823.3;AS/NZS 4776;AS/NZS 4776.2;AS/NZS 4965;AS/NZS 4965.2;AS/NZS 62301
适用范围：This Standard specifies the energy labelling requirements for single-phase non-ductedair conditioners of the vapour compression type and the minimum energy performancestandard (MEPS) requirements for single-phase and three-phase air conditioners of thevapour compression type up to a rated total cooling capacity of 65 kW that fall within thescope of AS/NZS 3823.1.1, AS/NZS 3823.1.2 or AS/NZS 3823.1.3.Particular regulatory requirements for different categories of air conditioning equipmentand validity dates are summarized in Appendix E of this Standard.This Standard does not specify electrical safety requirements.This Standard specifies the following values for cooling and heating, as applicable:(a) Rated power (input).(b) Rated capacity (output).(c) Energy Efficiency Ratio (EER) for cooling.(d) Coefficient of Performance (COP) for heating.(e) Annual Energy Efficiency Ratio (AEER) for cooling.(f) Annual Coefficient of Performance (ACOP) for heating.(g) Star Rating Index (SRI).(h) Star rating.(i) Some of the requirements for energy label validity.(j) The performance criteria for energy labelling validity.(k) Test report format.(l) Printing requirements for air conditioner appliance energy labels.(m) Minimum energy performance standard requirements for cooling and heating.(n) Power quality (power factor).1.2 EXCLUSIONSThe following equipment is excluded from the scope of this Standard:(a) Close controlled air conditioners within the scope of AS/NZS 4965 and chillerswithin the scope of AS/NZS 4776.(b) Multi-split systems (i.e., those having more than one indoor unit with an independentcontrol for each indoor unit) pending the development of a suitable test method.MEPS levels are under consideration.(c) Evaporative coolers or any other cooling systems that are not of the vapourcompression type.(d) Ground-water-sourced or ground-loop-sourced heat pumps within the scope ofPart 1.3.NOTE: Water loop heat pumps as defined in Part 1.3 are included within the scope of thisStandard.(e) Unbalanced air conditioners and spot coolers (these include some portable types).Regulatory requirements for these types are under consideration.(f) Single phase models that are designed for commercial applications, and where therequirements of (i), (ii) and (iii) below are met, are not required to display an EnergyRating label but are still required to be registered.(i) designed for and used only in non-residential applications; and(ii) not on display for sale through retail outlets; and(iii) not promoted in any catalogue or advertising material that could be interpretedas suitable for some residential applications.(g) Air conditioners powered by mains electricity specifically designed and sold only forinstallation in end-use mobile applications of caravans, mobile homes, camper vansand rail cars.(h) Models that have been granted exemption by the relevant Australian/New Zealandregulatory authority due to their specific design for application such as processheating or cooling, or for heating or cooling of spaces to conditions that are notintended for human comfort.