标准号:BS EN 993-17-1999
中文标准名称:成形密实耐火制品的试验方法.真空汞法对颗粒状材料体积密度的测定
英文标准名称:Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
标准类型:Q40
发布日期:1999/5/15 12:00:00
实施日期:1999/5/15 12:00:00
中国标准分类号:Q40
国际标准分类号:81.080
适用范围:This European Standard specifies the determination of the bulk density of granular refractory materials (grain bulk density) having a grain size greater than 2 mm, by the mercury method with vacuum.
NOTE 1 This method is intended as the reference method because of its reproducibility and simplicity in use. However, mercury is known to be a hazardous substance, and therefore the determination of bulk density of granular materials can be carried out according to prEN 993-18. This standard, which defines a method by water with vacuum, is recommended for all routine purposes. Nevertheless, depending on the nature of the material tested, the two methods can give different results.
NOTE 2 Under test conditions, applying a mercury pressure of 26,5 kPa, round pores with a diameter ≥ 55 μm and elongated pores with a width ≥ 27,5 μm are penetrated by mercury.
相关标准
《QB/T2930.1-2008》油墨中某些有害元素的限量及其测定方法 第1部分:可溶性元素
《QB/T2930.2-2008》油墨中某些有害元素的限量及其测定方法 第2部分:铅、汞、镉、六价铬
《GB/T38608-2020》油墨中可挥发性有机化合物(VOCS)含量的测定方法
《GB/T38608-2020》油墨中可挥发性有机化合物(VOCs)含量的测定方法
《GB/T32179-2015》耐火材料化学分析 湿法、原子吸收光谱法(AAS)和电感耦合等离子体原子发射光谱法(ICP-AES)的一般要求
《GB/T30873-2014》耐火材料 抗热震性试验方法
《YS/T1033-2015》干式防渗料元素含量的测定 X射线荧光光谱分析法
《GB/T7320-2018》耐火材料 热膨胀试验方法
《GB/T22459.5-2008》耐火泥浆 第5部分:粒度分布(筛分析)试验方法
《GB/T22459.4-2008》耐火泥浆 第4部分:常温抗折粘接强度试验方法
百检网专注于为第三方检测机构以及中小微企业搭建互联网+检测电商服务平台,是一个创新模式的检验检测服务网站。百检网致力于为企业提供便捷、高效的检测服务,简化检测流程,提升检测服务效率,利用互联网+检测电商,为客户提供多样化选择,从根本上降低检测成本提升时间效率,打破行业壁垒,打造出行业创新的检测平台。
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;