SAE J 2194-2009 轮式农业拖拉机用倾翻保护结构(ROPS)

标准号：SAE J 2194-2009
中文标准名称：轮式农业拖拉机用倾翻保护结构(ROPS)
英文标准名称：Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
标准类型：T60
发布日期：2009/4/2 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T60
国际标准分类号：13.340.20;65.060.10
引用标准：ASTM A 370-2009;ISO 612-1978;ISO 3462-1980;ISO 3463-2006;ISO 5700-2006;SAE J 114-1994;SAE J 140-1995;SAE J 141-1995;SAE J 339-1994;SAE J 429-1999;SAE J 674-2005;SAE J 800-1994;SAE J 995-1999;SAE J 1150-1997;SAE J 1194-2009;ASAE/S 313;ASAE/S 383
适用范围：Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirmenet. This can be satisfied by using the appropriate materials or by performing any of the structural performance tests at -18 degrees C. A laboratory test, under repeatable and controlled loading, to permit anaysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence or the impact test sequence shall be conducted. A set belt anchorage test. The test procedures and performance requirements outlined in this document are based on currently available engineering data. The purpose of this document is to establish the test and performance requirements of a roll-over protective structure (ROPS), designed for wheeled agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental tractor upset.