IEC 60320-2-4-2005 家用和类似一般用途电器耦合器.第2-4部分:接合用取决于器具重量的耦合器

标准号：IEC 60320-2-4-2005
中文标准名称：家用和类似一般用途电器耦合器.第2-4部分:接合用取决于器具重量的耦合器
英文标准名称：Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliances weight for engagement
标准类型：L23
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L23
国际标准分类号：29.120.30
引用标准：IEC 60320-1-2001;IEC 60320-2-2;IEC 60320-2-3;IEC 60335-1-2001;IEC 60664-1-1992
适用范围：This clause of IEC 60320-1 is replaced as follows:This standard is applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for incorporation or integration within electric appliances or other electric equipment of multi-part construction for 50 Hz or 60 Hz supply which depend on the weight of the appliance to ensure correct engagement.NOTE 1 Appliance couplers complying with this standard are suitable for use in appliances which are used in an ambient temperature not normally exceeding 25 °C but occasionally reaching 35 °C. However the ambient temperature surrounding the appliance coupler may exceed these figures and is to be declared by the manufacturer. It is possible that the maximum working ambient temperature for the appliance inlet and for the connector may be different.NOTE 2 Appliance couplers dependent on appliance weight for engagement may be subject to spillage of liquid in normal use. They are classified according to whether protection against water spillage is provided, when installed in accordance with the manufacturer's installation instructions.NOTE 3 If appliance inlets according to this standard are used with appliances or other equipment which may be subject to spillage of liquid affecting the appliance inlet when the functioning part of the appliance or equipment is seated on its power base, then protection against moisture is to be provided by the equipment.NOTE 4 References to standard sheets within IEC 60320-1 do not apply to appliance couplers dependent on appliance weight for engagement.NOTE 5 Special constructions may be required:- in locations where special conditions may prevail, for example, in ships, vehicles and the like;- in hazardous locations, for example, where explosions are likely to occur.