SAE J 2340-1999 抗凹痕,高强度及超高强度车用钢板的分类及性质

标准号：SAE J 2340-1999
中文标准名称：抗凹痕,高强度及超高强度车用钢板的分类及性质
英文标准名称：Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel
标准类型：T05
发布日期：1999/10/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T05
国际标准分类号：43.020;77.140.50
引用标准：ASTM A 370-1997;ASTM A 463-1988;ASTM A 568-1988;ASTM A 653/A 653M-1999;ASTM A 751-1996;ASTM A 924/A 924M-1999;ASTM A 980-1997;ASTM E 8-1999;ASTM E 8M-1999;ASTM E 517-1998;ASTM E 646-1998;ISO 13887-1995;SAE J 416-1983;SAE J 810-1996;SAE J 1058-1991;SAE J 1
适用范围：This SAE Recommended Practice defines and establishes mechanical property ranges for seven grades of continuously cast high strength automotive sheet steels that can be formed, welded, assembled, and painted in automotive manufacturing processes. The grade of steel specified for an identified part should be based on part requirements (configuration and strength) as well as formability. Material selection should also take into consideration the amount of strain induced by forming and the impact strain has on the strength achieved in the finished part. These steels can be specified as hot-rolled sheet, cold-reduced sheet, uncoated, or coated by hot dipping, electroplating, or vapor deposition of zinc, aluminum, and organic compounds normally applied by coil coating. The grades and strength levels are achieved through chemical composition and special processing. Not all combinations of strength and coating types may be commercially available. Consult your steel supplier for details.