标准号:BS EN 10087-1999
中文标准名称:快削钢.热轧棍和棒半成品技术交付条件.
英文标准名称:Free cutting steels - Technical delivery conditions for semi-finished products, hot rolled bars and rods
标准类型:H40
发布日期:1999/1/15 12:00:00
实施日期:1999/1/15 12:00:00
中国标准分类号:H40
国际标准分类号:77.140.50;77.140.60;77.140.65
引用标准:EN 10002-1;EN 10003-1;EN 10020;EN 10021;EN 10027-1
适用范围:1 This European Standard gives the technical delivery conditions for
—semi-finished products;
—hot-rolled bars (including peeled bars);
—rods;
manufactured from the free-cutting steels listed in Table 1.
This European Standard covers those groups of free-cutting steels classified as listed in Table 1.
NOTE European Standards for similar steels are listed for information in annex C.
2 In special cases, variations in these technical delivery conditions or additions to them may form the subject of an agreement at the time of enquiry and order (see annex B).
3 In addition to the specifications of this European Standard, the general technical delivery conditions specified in EN 10021 are applicable unless otherwise specified below.
相关标准
《GB4824-2013cl.6,cl.7》工业、科学和医疗设备 射频骚扰特性 限值和测量方法
《EN12015:20206.2.2》电磁兼容 电梯、自动扶梯和自动人行道的产品系列标准 发射
《GB/T17799.2-20038》电磁兼容 通用标准 工业环境中的抗扰度试验
《GB/T24808-2009表2,3,4,5,6,7》电磁兼容 电梯、自动扶梯和自动人行道的产品系列标准 抗扰度
《EN12015:20146.4》电磁兼容 电梯、自动扶梯和自动人行道产品族标准 发射
《EN12015:20146.2,6.6》电磁兼容 电梯、自动扶梯和自动人行道产品族标准 发射
《IEC61000-6-4:2018Table2》电磁兼容 通用标准工业环境电磁发射通用要求
《GB17799.4-2012IEC61000-6-4:2006+A1:2010ENIEC61000-6-4:20199》电磁兼容 通用标准工业环境电磁发射通用要求
《GB/T24807-20096.2,6.6》电磁兼容 电梯、自动扶梯和自动人行道的产品系列标准 发射
《ENIEC61000-6-1:20192.1,3.1,4.1,5.1》电磁兼容 通用标准居住商业和轻工业环境中的抗扰度试验
百检网专注于为第三方检测机构以及中小微企业搭建互联网+检测电商服务平台,是一个创新模式的检验检测服务网站。百检网致力于为企业提供便捷、高效的检测服务,简化检测流程,提升检测服务效率,利用互联网+检测电商,为客户提供多样化选择,从根本上降低检测成本提升时间效率,打破行业壁垒,打造出行业创新的检测平台。
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;