标准号:ISO 14922-3-1999
中文标准名称:热喷涂 热喷涂结构的质量要求 第3部分:标准质量要求
英文标准名称:Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements
标准类型:A29
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:A29
国际标准分类号:25.220.20
适用范围:This standard specifies requirements so that:
- It is independent of the type of the thermally sprayed structure.
- It defines quality requirements for thermal spraying both in workshops and on site.
- It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to meet specified requirements.
- It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability.
This standard is appropriate when demonstration of a manufacturer's capability to produce thermally sprayed construction, fulfilling specified quality requirements, are specified in one or more of the following:
- a contract between involved parties;
- an application standard;
- a regulatory requirement.
The requirements contained within this standard may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of thermal spraying in the following cases:
- Case 1
To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system other than EN ISO 9001 or EN ISO 9002.
- Case 2
To provide specific requirements for thermal spraying in contracts which require the manufacturer developing a quality system.
- Case 3
To provide specific requirements for thermal spraying in application standards which uses thermal spraying as part of its requirements or in a contract between relevant parties. It may however be more appropriate for EN ISO 14922-4 to be used in such cases.
相关标准
《GB/T30157-2013》纺织品 总铅和总镉含量的测定
《GB/T17593.2-2007》纺织品 重金属的测定 第2部分:电感耦合等离子体原子发射光谱法
《EN16128:2011》与皮肤长时间紧密接触的眼镜架和太阳镜的组件的镍释放量参考试验方法
《EN1811-2011+A1:2015》直接长期接触皮肤的产品中镍释放的测试方法
《GB/T17593.4-2006》纺织品 重金属的测定 第4部分 砷、汞原子荧光分光光度法
《GB/T20386-2006》纺织品 邻苯基苯酚的测定
《EN12472:2005》涂层部件镍释放量的检测用磨损和腐蚀的模拟方法
《GB/T17593.3-2006》纺织品 重金属的测定 第3部分六价铬 分光光度法
《GB/T18412.2-2006》纺织品 农药残留量的测定 第2部分:有机氯农药
《GB/T20387-2006》纺织品 多氯联苯的测定
百检网专注于为第三方检测机构以及中小微企业搭建互联网+检测电商服务平台,是一个创新模式的检验检测服务网站。百检网致力于为企业提供便捷、高效的检测服务,简化检测流程,提升检测服务效率,利用互联网+检测电商,为客户提供多样化选择,从根本上降低检测成本提升时间效率,打破行业壁垒,打造出行业创新的检测平台。
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;