作者:百检网 时间:2021-11-01 来源:互联网
EN 15638, DIN EN 15638 冰刀/溜冰鞋测试
EN 15638, DIN EN 15638冰刀溜冰鞋Ice skate - Safety requirements and test methods | |
Clause | Test Requirement |
Connection of the runner to the boot | |
Attachment of the blade in the blade holder (5.3&5.4) | |
Linearity of the runner | |
Position of the runner | |
Impact resistance | |
Surface condition | |
Condition of the blade | |
Toughness | |
Grinding(sharpening) | |
Teeth | |
Shape of the blade end | |
Thickness | |
6 | Labelling |
7 | Manufacturer’s Information |
Sample Size: 3 sets of completed products, and 3 pairs of blade and blade holders, with assembly instruction (if applicable) are recommended. | |
样品要求:3套样品及3对刀体套件,包括说明书(如适用) | |
Turnaround Time: | |
所需时间:标准10-12个工作天。 |
百检网专业提供EN15638检测服务,拥有丰富EN15638检测经验,并出具国际认可EN15638检测报告,
确保满足国际市场需求,为企业提升产品竞争力。
详情敬请联系EN15638 检测服务热线:15201733840(可加微信)
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;
①本网注名来源于“互联网”的所有作品,版权归原作者或者来源机构所有,如果有涉及作品内容、版权等问题,请在作品发表之日起一个月内与本网联系,联系邮箱service@baijiantest.com,否则视为默认百检网有权进行转载。
②本网注名来源于“百检网”的所有作品,版权归百检网所有,未经本网授权不得转载、摘编或利用其它方式使用。想要转载本网作品,请联系:service@baijiantest.com。已获本网授权的作品,应在授权范围内使用,并注明"来源:百检网"。违者本网将追究相关法律责任。
③本网所载作品仅代表作者独立观点,不代表百检立场,用户需作出独立判断,如有异议或投诉,请联系service@baijiantest.com