ONORM ENV 41214-1993 信息技术．A/MH11简表的功能标准．报文处理系统(1988及以后)公共设备．MTA和 MTS

标准号：ONORM ENV 41214-1993
中文标准名称：信息技术．A/MH11简表的功能标准．报文处理系统(1988及以后)公共设备．MTA和 MTS
英文标准名称：Information technology - Functional standard for profile A/MH11 - Message Handling Systems (1988 and later) -Common facilities - MTA and MTS
发布日期：1993/2/1 12:00:00
实施日期：1999/12/31 12:00:00
适用范围：1.1 IntroductionThe purpose of a profile is to recommend how certain information technology standards should be used to satisfy one or more specific requirements. In particular, a profile should determine which options available in the Base Specifications are necessary or desirable if the specific requirements are to be metThis profile applies to Message Handling Systems within the general context of the OSI Reference Model. The profile consists of two sub-profiles:A/MH 11.1, which defines the interworking of MTAs which implement the mts-transfer application contextA/MH11.2, which defines the interworking of MTAs which implement the mts-transfer-protocol and the mts-transfer-protocol-1984 application contexts.An implementation claiming conformance to A/MH11 shall support A/MH11.1, A/MH11.2 or both. The specific requirements of the sub-profiles are given in 4.2 and 4.6. The scope of this profile is the following: Specification of the conformance rules for the support of the Message Transfer Protocol (PI).Specification of the conformance rules for an MTA when interacting with an MTS-user. (These conformance rules do not apply to the MTS-user).Elements of Service, protocol elements and abstract operations are classified in a modular way (functional grouping) such that implementations may support the functional groups which are appropriate to meet their requirements.This document also includes specifications of security elements for MTS-users (UA/MS) that define requirements that are referenced from other MHS profiles. Other End User Services, UA, MS and AU functions are not covered by this profile.12 Position within the TaxonomyThis profile exists in the following context:Information Technology - Functional Standard for Profile A/MH11 - Message Handling SystemsCommon FacilitiesA/MH11 MTAandMTSA/MH12 UAtoMS(P7) A/MH13 UAorMStoMTA(P3)IPMSA/MH21 fPM end system to IPM end system (P2 over PI)A/MH22 IPM UA to IPM MS (P2 over P7)A/MH23 IPM UA or IPM MS to MTA (P2 over P3)A/MH24 Teletex to TLMA (IPM)EDIMSA/MH31 EDIMS end system to EDIMS end system (PEDi over PI)A/MH32 EDIMS UA to EDIMS MS (Peru over P7)A/MH33 EDIMS UA or EDIMS MS to MTA (?EDl over P3)A/MH34 Teletex to TLMA (EDI)1.3 Scenario DescriptionThe scenario is described in Figure 1. Figure 2 indicates the specifications from which this profile is derived.1.4 MaintenanceThe user is invited to check with the EWOS secretariat if any defect reports or corrigenda to this profile are available and may be obtained from:European Workshop for Open Systems Attn: Mr. Luc van den Berghe Rue de Stassart, 36 B -1050 Brussels BELGIUMSuch documents may be subject to conformance.1.5 Base SpecificationsThe Base Specifications on which this profile was developed comprise the X.400 series of Recommendations and the ISO/EC 10021 MOTIS Standards as modified by the MHS Implementors' Guide and the published ISO/IEC Technical Corrigenda numbers 1,2,3 and 4. An implementor shall state in the PICS whether any later version of the Implementors' Guide and any further Technical Corrigenda have been implemented.